Availability: 8 in stock
The SENSORWORX family of wall switch occupancy/vacancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX 0-10V dimming wall switch sensor is significantly shallower than typical dimmers and sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion limited. For dimming adjustable, intuitive raise and lower buttons are present in a addition to an on/off button.
FEATURES
ELECTRICAL
Interchangeable Line & Load Wires – Impossible to Wire Backwards
Accommodates Neutral (3-Wire) and No-Neutral (2-Wire) Installation
Electronically Timed Switching Ensures Long Relay Life
Compatible with 0-10V Dimmable LED, and Fluorescent Lighting
Meets NEC 404.2(c) & 404.22 Guidelines Regarding Powering Over Ground & Current Leakage
PHYSICAL
Enclosure is 25-40% Shallower than Other Sensors (< 1″ Depth into Wallbox)
Unique Bat-Wing Shaped Lens Provides Enhanced Peripheral Detection
Self-Grounding Mounting Strap
Modern Look and Intuitive Easy-Tap Buttons for On/Off, Raise, & Lower
Rugged Vandal Resistant Lens
Settings are Adjustable Without Removing Cover Plate
OPERATIONAL
Wall-to-Wall Passive Infrared Small Motion Detection
Passive Acoustic Detection (Optional) – Prevents False Offs when No Motion is Presented
100% Passive Detection Methods – No Interference Potential from External Devices
Configurable Sensor Settings Including Time Delays and Occupancy/Vacancy Operating Modes
Configurable Dimming Parameters including High/Low Trims, Turn on Levels, and Curve Types
Blue Locator LED when Lights are Off
COVERAGE PATTERNS
30″ to 48″ (0.76 – 1.22 m) recommended mounting height
Wall to wall (~180 degree) coverage
Small motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft2
Large motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft2
Overlapping Acoustic detection of occupants over entire coverage area
Advanced signal processing filters out nuisance noices while not effecting overall sensitivity
APPLICATIONS
A wall switch sensors is typically used to retrofit an existing wall switch in a small room or enclosed space. A Passive Infrared (PIR) only sensor is sufficient for spaces where line of site is maintained and occupants are periodically moving (e.g., copy rooms, storage rooms). Dual tehnology sensors are necessary where occupants may be partially blocked from the sensor’s direct view or where they may be stationary(e.g., private offices or restrooms with stalls).
Private Restrooms
Copy Rooms
Restroom with Stalls
Small Meeting Room
Small Offices
Vestibule
Storage Room
Break Room
SPECIFICATIONS
Operating Voltage: 120/277 VAC, 50/60 Hz
Load Ratings: MAX: 800W @ 120VAC|1200W @ 277VAC
Load Types: LED Driver/Lamps, CFL, Electronic/Magnetic Ballasts (Fluorescent), Tungsten (Incandescent)
Dimming Compatibility: 0-10 VDC Ballasts or drivers compliant with IEC 60929 Annex E.2
Dimming Load: -50 mA (sink only)
Operating Temp: 32°F to 122°F (0°C to 50°C – Standard -40° F/C (with -HE Option)
Relative Humidity: 0-95% Non-Condensing, Indoor Use Only
Mounting: Single Gang Switch Box
