Availability: 8 in stock
The SENSORWORX family of wall switch occupancy sensors provides a simple yet cost effective lighting control solution for many retrofit applications. Designed with contractors in mind, the SENSORWORX wall switch sensor is significantly shallower than typical sensors, resulting in less crowed wall boxes. Additionally, versatile wiring enables usage with or without a neutral and allows reversal of line and load connections. SENSORWORX products utilize the latest passive infrared technology and digital signal processing techniques to provide unmatched motion detection performance. These units are also available with an integrated microphone to provide overlapping passive acoustic occupancy detection for rooms with obstructions or where occupant motion is limited.
Sensors detect movement in the infrared energy that radiates from occupants as they move within the devices field-of-view. Once occupancy is identified, the sensor’s internal relay switches power on to the connected lighting. Units can also be configured to operate in Vacancy Mode (e.g., require lights be manually switched on). Once lights are on and if equipped with passive dual technology (PIR/Acoustic), the unit’s microphone is enabled to further enhance detection. An internal timer is set to keep lights on during brief periods of inactivity, and is reset every time occupancy is signaled by either the passive infrared or acoustic detection technologies. Ambientdaylight detection can also be enabled in equipped units so that lights are held off in rooms with sufficient light contribution from windows or skylights.
FEATURES
ELECTRICAL
Interchangeable Line & Load Wires – Impossible to Wire Backwards
Accommodates Neutral (3-Wire) and No-Neutral (2-Wire) Installation
Electronically Timed Switching Ensures Long Relay Life
Compatible with LED, Fluorescent and Incandescent Lighting
Meets NEC 404.2(c) & 404.22 Guidelines Regarding Powering Over Ground & Current Leakage
PHYSICAL
Enclosure is 25-40% Shallower than Other Sensors (< 1” Depth into Wallbox)
Unique Bat-Wing Shaped Lens Provides Enhanced Peripheral Detection
Self-Grounding Mounting Strap
Modern Look and Intuitive Easy-Tap Button
Rugged Vandal Resistant Lens
Settings are Adjustable Without Removing Cover Plate
OPERATIONAL
Wall-To-Wall Passive Infrared Small Motion Detection
Passive Acoustic Detection (Optional) – Prevents False Offs when No Motion is Present
100% Passive Detection Methods – No Interference Potential from External Devices
Ambient Daylight Override Mode Increases Energy Savings (Optional)
Configurable Time Delays and Operating Modes
Blue Locator LED when Lights are Off
COVERAGE PATTERNS
30” to 48” (0.76 – 1.22 m) recommended mounting height
Wall to wall (~180 degree) coverage
Small motion (e.g., hand movement) detection up to 20 ft (6.10 m), ~625 ft²
Large motion (e.g., walking) detection greater than 36 ft (10.97 m), ~ 2025 ft²
Overlapping acoustic detection of occupants over entire coverage area
Advanced signal processing filters out nuisance noises while not effecting overall sensitivity.
APPLICATIONS
A wall switch sensor is typically used to retrofit an existing wall switch in a small room or enclosed space. A Passive Infrared (PIR) only sensor is sufficient for spaces where line of site is maintained and occupants are periodically moving (e.g., copy rooms, storage rooms). Dual technology sensors are necessary where occupants may be partially blocked from the sensor’s direct view or where they may be stationary (e.g., private offices or restrooms with stalls).
Private Restrooms
Copy Rooms
Restroom with Stalls
Small Meeting Room
Small Office
Vestibule
Storage Room
Break Room
SPECIFICATIONS
Operating Voltage: 120/277VAC, 50/60Hz
Load Ratings: MAX: 800W @ 120VAC|1200W @ 277VAC, MIN: None
Load Types: LED Driver/Lamps, CFL, Electronic/Magnetic Ballasts (Fluorescent), Tungsten (Incandescent)
Operating Temp: 32°F to 122°F (0°C to 50°C) – Standard, -40° F/C (with -HE Option)
Relative Humidity: 0-95% Non-Condensing, Indoor Use Only
